killocomp.blogg.se - Extreme sample converter freezes

#EXTREME SAMPLE CONVERTER FREEZES HOW TO#
#EXTREME SAMPLE CONVERTER FREEZES MAC OS#
#EXTREME SAMPLE CONVERTER FREEZES UPDATE#
#EXTREME SAMPLE CONVERTER FREEZES PC#
#EXTREME SAMPLE CONVERTER FREEZES SERIES#

Open the respective control panel on the external device to be captured related to your graphics card.

There are certain settings that need to be configured on the external devices to be captured. Note: Please do not use Reference Input port (i.e., crossed port as shown in the image to the right) for any kind of connection.

#EXTREME SAMPLE CONVERTER FREEZES SERIES#

If you have more than one capture card, the port number will be incremented following the series pattern given below.Į.g., If the system has two Blackmagic DeckLink Quad 2 capture cards installed First card's port number: 1-5-2-6-3-7-4-8 Second card's port number: 9-13-10-14-11-15-12-16.

#EXTREME SAMPLE CONVERTER FREEZES PC#

The image shows a system with multiple capture cards but the port numbers are shown assuming PC has only one capture card.Illustration of a system with multiple capture cards installed Attach a "USB to Micro USB" cable from computer to the micro converter.

#EXTREME SAMPLE CONVERTER FREEZES MAC OS#

Install the setup on Windows or Mac OS computer.

#EXTREME SAMPLE CONVERTER FREEZES UPDATE#

Download Blackmagic Converters Setup (Choose Blackmagic Converters 7.0.9 Update or latest if any available).

This means you can send video signals from HDMI over SDI using the longest SDI cables. You can use Micro Converter HDMI to SDI to convert HDMI outputs (from devices such as laptops, smartphones, tablets etc.) to SDI. ( Blackmagic Micro Converter HDMI to SDI is considered as an example to quote the steps). Step 3: Configure Blackmagic Converters Setup Once saved all 8 ports on the capture card can be individually used for input.įor detailed instructions on configuring Blackmagic capture cards please visit Installation and Operational Manual.

Ports 5,6,7,8 will show None by default and can be changed to its individual SDI port number:ĭecklink Quad (5) - Change to SDI 2 Decklink Quad (6) - Change to SDI 4 Decklink Quad (7) - Change to SDI 6 Decklink Quad (8) - Change to SDI 8 Simultaneously click on Save button after every change.

Repeat the same process for the remaining ports, i.e., changing the Connector to the individual SDI port number and clicking the Save button.ĭecklink Quad (2) - Change to SDI 3 Decklink Quad (3) - Change to SDI 5 Decklink Quad (4) - Change to SDI 7.

It should show SDI 1 & SDI 2 by default as shown in the image to the right, change this to SDI 1.

Go to Connector Mapping > Connector, under Video tab.

( DeckLink Mini Recorder, Duo 2 and Quad 2 are considered as examples to quote these steps). Once configured follow the below mentioned steps depending on the type of capture card used:

Click on the hardware image, or the settings icon located below the hardware name.

Go to Applications > Sound & Video > Blackmagic Desktop Video Setup.

If there are multiple Capture Cards connected, you can cycle through them by clicking the arrow buttons on the sides of the home page and select the appropriate capture card port whose settings you wish to configure. If you are sending a video signal to your input, it will be automatically detected and the format will be displayed under the VIDEO INPUT icon. The "Desktop Video Setup" home page displays all the connected capture cards. Step 2: Configure Blackmagic Desktop Video Setup

Update Blackmagic Software, if it is not up-to-date.

Go to Applications > Sound & Video > Blackmagic Firmware Updater.

The "Blackmagic Firmware Updater" enables the users to update the firmware of the connected capture cards. Step 1: Configure Blackmagic Firmware Updater Note: Steps 1 through 4 below are already completed if your system is purchased and shipped by Userful.

#EXTREME SAMPLE CONVERTER FREEZES HOW TO#

This document walks you through the installation instructions for configuring hardware settings for Blackmagic Capture Cards and how to use them with Userful™ software.

1.7.1 Map Displays to the Blackmagic DeckLink Source.

1.6.1 Mapping: Creating Blackmagic DeckLink Capture Source.

1.6 Step 6: Create Blackmagic DeckLink Capture Source.

1.5 Step 5: Configuring External Devices.

1.4 Step 4: Ensure that Blackmagic capture card ports are correctly configured.

1.3 Step 3: Configure Blackmagic Converters Setup.

1.2.1 Blackmagic DeckLink Mini Recorder.

1.2 Step 2: Configure Blackmagic Desktop Video Setup.

1.1 Step 1: Configure Blackmagic Firmware Updater.